Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Oil on the Husaberg FE 390?

Model: Husaberg Fe 390
Part: Engine oil

Video tutorial

To change the oil on the Husaberg FE390, you need to remove the protection plate located under the engine by unscrewing the appropriate bolt. Next, remove the oil filter cap and then extract the filter itself: it is advisable to place a container under the oil drain plug and let it drain completely into the container.

Once all the oil has drained from the tank, close the drain plug and top up through the designated cap located on the right side of the bike. Ensure you use the correct oil specifications and the right quantity.


Updated on 20 April 2026 by ScegliAuto


Related tutorials

Instructions for Disassembling the Piston of a Husaberg FE 390
Instructions for Disassembling the Piston of a Husaberg FE 390
Fe 390 In this video tutorial, you will learn how to disassemble the piston of a Husaberg FE 390, as well as other motorcycle models such as KTM and Husqvar…
How to Replace the Exhaust on a Husaberg FE 390
How to Replace the Exhaust on a Husaberg FE 390
Fe 390 To replace the exhaust on a Husaberg FE 390, start by loosening the screws that secure the side protection panel of the rear mudguard on the right si…
How to Replace the Exhaust on a Husaberg FE 390?
How to Replace the Exhaust on a Husaberg FE 390?
Fe 390 To replace the exhaust on the Husaberg FE 390, loosen the screws securing the exhaust cover panel located near the mudguard. This can now be removed …

How to replace the clutch lever on the Sherco SEF 300?

To replace the clutch lever on the Sherco SEF 300, you need to loosen the screws that secure the lever to its housing on the left side of the handlebars. Once these screws are loosened, you can unscrew the nut at the base of the lever to disconnect the clutch cable attached to the corresponding lever. Once the cable is detached, the lever can be removed from its housing and replaced with a new spare part; after installation, ensure that it functions correctly.

Watch the video!


by ScegliAuto

More videos