Husqvarna Husqvarna 125 - DIY video guides

Husqvarna Husqvarna 125 - Video guides

Husqvarna Husqvarna 125
How to Reset the Service Light on a Huqsvarna 125
In this mini guide, discover how to manually reset the service light on your Huqsvarna 125. The entire procedure takes just a few seconds to complete without …Read all…
Posted on 9 October 2026 by ScegliAuto

Husqvarna Husqvarna 125
How to disassemble and clean the carburettor of the Husqvarna 125
In this guide, you will find the steps to disassemble and clean the carburettor of the Husqvarna 125 enduro motorcycle. First, turn off the fuel tap and …Read all…
Posted on 8 September 2026 by ScegliAuto

Husqvarna Husqvarna 125
Routine Maintenance on Husqvarna 125
This video shows how to change the oil and the related filter (which should be done every 20 hours of use) and replace the air filter. It is recommended to use …Read all…
Posted on 31 May 2026 by ScegliAuto

Husqvarna Husqvarna 125
How to Change the Engine Oil and Tension the Drive Chain on a Husqvarna 125
Today, we will see how to change the engine oil and tension the drive chain on your Husqvarna 125. First, tension the chain by loosening the rear wheel bolt to …Read all…
Posted on 29 March 2026 by ScegliAuto

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!

by ScegliAuto

Husqvarna Husqvarna 125 - Video guides

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

More videos