Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This video shows how to change the oil and the related filter (which should be done every 20 hours of use) and replace the air filter. It is recommended to use a 15W-50 oil. After warming the engine for a few minutes, undo the oil drain bolt (and clean it) and collect the used lubricant in a container (and dispose of it properly). While the oil drains, unscrew and replace the oil filter. Tighten the bolt to 20 Nm. Pour in 700 ml of the aforementioned lubricant after unscrewing the oil cap. To replace the air filter, simply remove the left fairing that protects it.

Updated on 21 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble and clean the carburettor of the Husqvarna 125
How to disassemble and clean the carburettor of the Husqvarna 125
Husqvarna 125 In this guide, you will find the steps to disassemble and clean the carburettor of the Husqvarna 125 enduro motorcycle. First, turn off the fuel tap …
How to Reset the Service Light on a Huqsvarna 125
How to Reset the Service Light on a Huqsvarna 125
Husqvarna 125 In this mini guide, discover how to manually reset the service light on your Huqsvarna 125. The entire procedure takes just a few seconds to complete…
How to Change the Engine Oil and Tension the Drive Chain on a Husqvarna 125
How to Change the Engine Oil and Tension the Drive Chain on a Husqvarna 125
Husqvarna 125 Today, we will see how to change the engine oil and tension the drive chain on your Husqvarna 125. First, tension the chain by loosening the rear whe…

Replacing the Front Brake Pads on the Piaggio Vespa 50 LX

This guide will illustrate the instructions on how to remove and replace the front brake pads on the Piaggio Vespa 50 LX. First, place your scooter on the centre stand and start unscrewing the nuts securing the front wheel to remove it; then use pliers to remove the brake pad retaining clip, as shown in the video. At this point, remove the old pads, cleaning the caliper of dirt; press the caliper piston back to allow for the installation of the new pads (of excellent quality). Finally, reassemble the front wheel.

Watch the video!


by ScegliAuto

More videos