Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Engine Oil and Tension the Drive Chain on a Husqvarna 125

Model: Husqvarna Husqvarna 125
Part: Engine oil

Video tutorial

Today, we will see how to change the engine oil and tension the drive chain on your Husqvarna 125. First, tension the chain by loosening the rear wheel bolt to allow the axle to move. Using an Allen key, tighten until the chain is sufficiently tight, then retighten the wheel bolt.

Next, for the engine oil change, take a container to collect the used oil and place it under the drain plug. Unscrew the drain plug and let all the oil drain out. Screw the drain plug back in, unscrew the filler cap, and add the new oil.


Updated on 9 March 2026 by ScegliAuto


Related tutorials

Husqvarna 125 This video shows how to change the oil and the related filter (which should be done every 20 hours of use) and replace the air filter. It is recommen…
Husqvarna 125 In this guide, you will find the steps to disassemble and clean the carburettor of the Husqvarna 125 enduro motorcycle. First, turn off the fuel tap …
Husqvarna 125 In this mini guide, discover how to manually reset the service light on your Huqsvarna 125. The entire procedure takes just a few seconds to complete…

How to Change the Engine Oil on the KTM EXC-F 350?

To change the engine oil on the KTM EXC-F 350, loosen the drain plug located at the central lower part of the oil sump: once this plug is removed, all the used oil can flow into a suitably positioned container. When all the oil has drained out, remove the oil filter from its housing and replace it with a new one: this filter is located on the left side of the bike. On the opposite side, there will be a breather through which to insert the necessary amount of new engine oil.

Watch the video!


by ScegliAuto

More videos