Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Huqsvarna 125

Model: Husqvarna Husqvarna 125
Part: Service warning light

Video tutorial

In this mini guide, discover how to manually reset the service light on your Huqsvarna 125. The entire procedure takes just a few seconds to complete without any difficulty. First, place it on its stand for safety and turn on the ignition.

Immediately, press and hold both the button on the left and the button on the right of the dashboard simultaneously, and release them as soon as the display starts to flash. Next, manually adjust the kilometres remaining until the next service.

Finally, exit the menu to save the changes.


Updated on 16 July 2026 by ScegliAuto


Related tutorials

How to disassemble and clean the carburettor of the Husqvarna 125
How to disassemble and clean the carburettor of the Husqvarna 125
Husqvarna 125 In this guide, you will find the steps to disassemble and clean the carburettor of the Husqvarna 125 enduro motorcycle. First, turn off the fuel tap …
How to Change the Engine Oil and Tension the Drive Chain on a Husqvarna 125
How to Change the Engine Oil and Tension the Drive Chain on a Husqvarna 125
Husqvarna 125 Today, we will see how to change the engine oil and tension the drive chain on your Husqvarna 125. First, tension the chain by loosening the rear whe…
Routine Maintenance on Husqvarna 125
Routine Maintenance on Husqvarna 125
Husqvarna 125 This video shows how to change the oil and the related filter (which should be done every 20 hours of use) and replace the air filter. It is recommen…

How to Replace the Shaft Seals on the GasGas EC 125?

To replace the shaft seals on the GasGas EC 125, loosen the nut that secures the sprocket, located on the left side of the bike. Once the sprocket is removed, moving the chain as well, you can locate the shaft seals positioned at the bottom of the sprocket. Using a tool like a screwdriver, pry out the old seals from their housing and replace them with new spare parts. After replacement, reinstall the sprocket and the corresponding chain, ensuring everything functions correctly.

Watch the video!


by ScegliAuto

More videos