Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble and clean the carburettor of the Husqvarna 125

Model: Husqvarna Husqvarna 125
Part: Carburetor

Video tutorial

In this guide, you will find the steps to disassemble and clean the carburettor of the Husqvarna 125 enduro motorcycle. First, turn off the fuel tap and disconnect the fuel line; then unscrew the clamp screw of the intake duct to disconnect and remove the carburettor, as shown in the video.

At this point, disconnect the throttle cable from the slide by unscrewing the two upper screws of the carburettor; then clean the jets and the filter, following the video tutorial to the end!


Updated on 26 June 2026 by ScegliAuto


Related tutorials

Routine Maintenance on Husqvarna 125
Routine Maintenance on Husqvarna 125
Husqvarna 125 This video shows how to change the oil and the related filter (which should be done every 20 hours of use) and replace the air filter. It is recommen…
How to Change the Engine Oil and Tension the Drive Chain on a Husqvarna 125
How to Change the Engine Oil and Tension the Drive Chain on a Husqvarna 125
Husqvarna 125 Today, we will see how to change the engine oil and tension the drive chain on your Husqvarna 125. First, tension the chain by loosening the rear whe…
How to Reset the Service Light on a Huqsvarna 125
How to Reset the Service Light on a Huqsvarna 125
Husqvarna 125 In this mini guide, discover how to manually reset the service light on your Huqsvarna 125. The entire procedure takes just a few seconds to complete…

How to Replace the Shaft Seals on the GasGas EC 125?

To replace the shaft seals on the GasGas EC 125, loosen the nut that secures the sprocket, located on the left side of the bike. Once the sprocket is removed, moving the chain as well, you can locate the shaft seals positioned at the bottom of the sprocket. Using a tool like a screwdriver, pry out the old seals from their housing and replace them with new spare parts. After replacement, reinstall the sprocket and the corresponding chain, ensuring everything functions correctly.

Watch the video!


by ScegliAuto

More videos