Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Engine of a Husqvarna CR 360?

Model: Husqvarna Cr 360
Part: Engine

This video is currently unavailable

To dismantle the engine of a Husqvarna CR 360, you need to loosen the screws that secure the engine block to its housing in the centre of the frame, allowing it to be completely removed: once it is freed, you can also remove all connectors and the respective intake and exhaust manifolds.

When the block is freed, you will need to loosen the screws that secure the cylinder to its seat so that it can be detached: the piston inside will be released from the connecting rod, allowing access to the crankshaft and all further internal components.


Updated on 27 October 2026 by ScegliAuto


Related tutorials

How to Dismantle the Engine of the Husqvarna TE 450?
How to Dismantle the Engine of the Husqvarna TE 450?
Te 449 To dismantle the engine of the Husqvarna TE 450, extract it from its housing by loosening the screws that secure it to the supports and disconnecting…
How to dismantle the engine of the Husqvarna SM 125?
How to dismantle the engine of the Husqvarna SM 125?
Sm 125 To dismantle the engine of the Husqvarna SM 125, you need to loosen the bolts that secure the engine block to its housing located at the centre of th…
How to Dismantle the Engine of the Husqvarna FC 250?
How to Dismantle the Engine of the Husqvarna FC 250?
Fc 250 To dismantle the engine of the Husqvarna FC 250, you need to loosen the screws that secure the engine block to its housing. By disconnecting the pipe…

How to Change the Engine Oil of a BMW R9T

To change the engine oil of a BMW R9T, follow these steps. Ensure the engine is warm but not too hot. Position the bike on a flat surface and lift the front using a motorcycle stand. Remove the oil cap from the engine oil reservoir. Place a catch container under the oil drain plug, usually located on the underside of the engine. Unscrew the oil drain plug and let the old oil drain completely into the container. Once drained, re-tighten the oil drain plug. Remove the oil filter using an oil filter wrench. Clean the mounting surface of the filter and apply a bit of new oil to the seal of the new filter. Install the new oil filter. At this point, fill the engine with new oil, and you will have completed the replacement.

Watch the video!


by ScegliAuto

More videos