Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Husqvarna Te 449
Part: Engine

To dismantle the engine of the Husqvarna TE 450, extract it from its housing by loosening the screws that secure it to the supports and disconnecting all the pipes and connectors attached to it. Once the engine is freed from its housing, proceed by loosening the screws that secure the cylinder, completely removing it and also extracting the piston underneath. Once access to the crankshaft is obtained, it may be possible to replace the components and reassemble all the previously removed parts.

Updated on 6 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fuel Pump on a Husqvarna TE 450
How to Replace the Fuel Pump on a Husqvarna TE 450
Te 449 To replace the fuel pump on a Husqvarna TE 450, you need to loosen the screws securing the seat and the fuel tank. The pump will be located at the bo…
How to replace the sprocket of the Husqvarna TE 449
How to replace the sprocket of the Husqvarna TE 449
Te 449 In this guide we will see the instructions that will allow us to disassemble the sprocket (of the chain group, crown and sprocket) of the Husqvarna T…
How to Replace the Sprocket on a Husqvarna TE 449
How to Replace the Sprocket on a Husqvarna TE 449
Te 449 To replace the sprocket on the Husqvarna TE 449, first unscrew the pin that holds the rear wheel, removing it from the swingarm. Next, loosen the 14 …

How to reset the oil light on the Honda SH 125

If the oil light appears on your Honda SH 125 dashboard despite having recently changed the oil, don't worry as you can resolve this minor issue with a simple manual reset procedure. First, turn on the ignition and hold down the "Info A" and "Info B" buttons located at the bottom of the left knob. At this point, press the "Info B" button multiple times until the oil change indicator starts to flash. Finally, press the "Info A" button once to perform the reset. The procedure is now complete.

Watch the video!


by ScegliAuto

More videos