Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the sprocket on the Husqvarna TE 449, first unscrew the pin that holds the rear wheel, removing it from the swingarm. Next, loosen the 14 mm nut of the shock absorber and remove the two protective covers located on either side of the bike. At this point, use a 10 mm Allen key to loosen the two pins of the swingarm, as the sprocket is completely hidden by the swingarm bearing. Once the bearing is removed, you will be able to loosen the screws that secure the sprocket and remove it from the chain. Now the sprocket can be replaced, and all previously removed parts can be reassembled.

Updated on 21 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the sprocket of the Husqvarna TE 449
How to replace the sprocket of the Husqvarna TE 449
Te 449 In this guide we will see the instructions that will allow us to disassemble the sprocket (of the chain group, crown and sprocket) of the Husqvarna T…
How to Dismantle the Engine of the Husqvarna TE 450?
How to Dismantle the Engine of the Husqvarna TE 450?
Te 449 To dismantle the engine of the Husqvarna TE 450, extract it from its housing by loosening the screws that secure it to the supports and disconnecting…
How to Replace the Fuel Pump on a Husqvarna TE 450
How to Replace the Fuel Pump on a Husqvarna TE 450
Te 449 To replace the fuel pump on a Husqvarna TE 450, you need to loosen the screws securing the seat and the fuel tank. The pump will be located at the bo…

How to Change the Engine Oil in an Aprilia RS 660?

In this tutorial, we will see how to change the engine oil in an Aprilia RS 660, a very simple operation to be done every 12 months. First, ensure that the engine is completely cold, then remove the screws securing the lower fairing and take it off. Next, place a container underneath the bike, unscrew the drain bolt with an 8 mm hex key, and let all the oil in the system drain out. At this point, you can replace the filter, reassemble everything, and add new oil through the designated fill hole.

Watch the video!


by ScegliAuto

More videos