Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump on a Husqvarna TE 450

Model: Husqvarna Te 449
Part: Fuel pump

Video tutorial

To replace the fuel pump on a Husqvarna TE 450, you need to loosen the screws securing the seat and the fuel tank. The pump will be located at the bottom of the tank, which is now accessible.

To remove it, loosen all the fixing screws on the mounting plate and disconnect the connector. Once all screws are loosened, the pump can be extracted from its housing and replaced.

The new pump should then be inserted into the tank, which can be secured at the top of the bike after reconnecting the connector.


Updated on 25 April 2026 by ScegliAuto


Related tutorials

How to Dismantle the Engine of the Husqvarna TE 450?
How to Dismantle the Engine of the Husqvarna TE 450?
Te 449 To dismantle the engine of the Husqvarna TE 450, extract it from its housing by loosening the screws that secure it to the supports and disconnecting…
How to Replace the Sprocket on a Husqvarna TE 449
How to Replace the Sprocket on a Husqvarna TE 449
Te 449 To replace the sprocket on the Husqvarna TE 449, first unscrew the pin that holds the rear wheel, removing it from the swingarm. Next, loosen the 14 …
How to replace the sprocket of the Husqvarna TE 449
How to replace the sprocket of the Husqvarna TE 449
Te 449 In this guide we will see the instructions that will allow us to disassemble the sprocket (of the chain group, crown and sprocket) of the Husqvarna T…

How to Replace the Air Filter on a Honda SH 300i Scooter?

In this tutorial, you will see how to replace the air filter on a Honda SH 300i scooter, a very simple and quick operation. Before proceeding, ensure the engine is completely cold for safety. Start by unscrewing both the 6 screws around the perimeter of the airbox and the 3 bolts of the circular cover, then remove the cover and unscrew the additional screw that has just been freed. Next, separate the box, remove the old filter, and clean the housing of any dirt residue. Finally, follow the reverse procedure to install the replacement.

Watch the video!


by ScegliAuto

More videos