Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Husqvarna Te 449 - Video guides

Husqvarna Te 449
How to replace the sprocket of the Husqvarna TE 449
In this guide we will see the instructions that will allow us to disassemble the sprocket (of the chain group, crown and sprocket) of the Husqvarna TE 449 …Read all…
Posted on 8 September 2025 by ScegliAuto
Husqvarna Te 449
How to Dismantle the Engine of the Husqvarna TE 450?
To dismantle the engine of the Husqvarna TE 450, extract it from its housing by loosening the screws that secure it to the supports and disconnecting all the …Read all…
Posted on 6 September 2026 by ScegliAuto
Husqvarna Te 449
How to Replace the Fuel Pump on a Husqvarna TE 450
To replace the fuel pump on a Husqvarna TE 450, you need to loosen the screws securing the seat and the fuel tank. The pump will be located at the bottom of …Read all…
Posted on 7 June 2026 by ScegliAuto
Husqvarna Te 449
How to Replace the Sprocket on a Husqvarna TE 449
To replace the sprocket on the Husqvarna TE 449, first unscrew the pin that holds the rear wheel, removing it from the swingarm. Next, loosen the 14 mm nut of …Read all…
Posted on 31 May 2026 by ScegliAuto

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos