Do it yourself
Frequently asked questions about cars and motorcycles

Model: Husqvarna Fe 701
Part: Clutch

In today’s tutorial, we will see how to remove and replace the clutch discs on a Husqvarna FE 701 enduro bike in simple and quick steps. First, remove the right footpeg bracket and the gear lever by unscrewing the fixing screws; then unscrew all the side screws of the clutch cover after draining the engine oil, as shown in the video. At this point, unscrew the screws of the clutch basket and extract the discs; now replace them with new ones of the correct type, applying the reverse procedure to reassemble everything!

Updated on 19 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Te 300i Today, discover the steps to dismantle and replace the clutch discs on the Husqvarna TE 300 enduro bike, as well as on the Husaberg and KTM. First, r…
Te 250 In order to replace the clutch of the Husqvarna TE 250, you need to loosen the screws that secure the panel on the side of the motorcycle: this way y…
701 Sm In today’s tutorial, you will learn how to replace the clutch discs on the Husqvarna 701 Supermoto. First, drain the engine oil by unscrewing the dra…

How to Service the Beta RR 350

This video will illustrate the steps to perform the routine maintenance service, replacing the engine oil and oil filter on the Beta RR 350 enduro bike. First, place the bike on a stand and start by loosening the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then clean the small oil filter (replacing it with a new one if too dirty). Finally, top up with new oil, of the correct type for your engine, filling to the maximum level!

Watch the video!


by ScegliAuto

More videos