Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine oil and oil filter on a Husqvarna 701 SM

Model: Husqvarna 701 Sm
Part: Engine oil

Video tutorial

Below, discover the steps that will allow you to carry out the routine maintenance service by replacing the engine oil and oil filter on the Husqvarna 701 Supermoto. First, place your bike on a stand and start unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the screws of the oil filter cover, removing and replacing the cartridge with the new one, as shown in the video.

At this point, unscrew the filler cap and pour in the suitable oil for your engine!


Updated on 5 June 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil and Oil Filter on the Husqvarna 701 Supermoto
How to Change the Engine Oil and Oil Filter on the Husqvarna 701 Supermoto
701 Sm This short video will show the steps to perform routine maintenance by changing the engine oil and oil filter on the Husqvarna 701 Supermoto. First, …
How to Change the Engine Oil and Oil Filter on a Husqvarna 701 SM
How to Change the Engine Oil and Oil Filter on a Husqvarna 701 SM
701 Sm In this guide, we will discover the instructions that will allow you to perform the routine maintenance service, replacing the engine oil and oil fil…
Replace the Engine Oil and Oil Filter of the Husqvarna SM 701
Replace the Engine Oil and Oil Filter of the Husqvarna SM 701
701 Sm Follow these step-by-step instructions to perform the routine maintenance service on the Husqvarna 701 Supermoto. First, place your motorcycle on a s…

How to Replace the Shaft Seals on the GasGas EC 125?

To replace the shaft seals on the GasGas EC 125, loosen the nut that secures the sprocket, located on the left side of the bike. Once the sprocket is removed, moving the chain as well, you can locate the shaft seals positioned at the bottom of the sprocket. Using a tool like a screwdriver, pry out the old seals from their housing and replace them with new spare parts. After replacement, reinstall the sprocket and the corresponding chain, ensuring everything functions correctly.

Watch the video!


by ScegliAuto

More videos