Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Change the Engine Oil and Oil Filter of the Husqvarna FE 450

Model: Husqvarna Fe 450
Part: Engine oil

Video tutorial

Today, we will go through the necessary instructions to perform the routine maintenance service by changing the engine oil and oil filter of the Husqvarna FE 450 enduro bike. First, place your bike on a stand and start unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes.

After that, unscrew the screws of the oil filter cover, removing and replacing the cartridge with the new one, as shown in the video. Now, unscrew the filler screw and top up with new oil, as indicated in the bike's user and maintenance manual!


Updated on 7 June 2026 by ScegliAuto


Related tutorials

Engine Oil and Oil Filter Replacement for the Husqvarna FE 450
Engine Oil and Oil Filter Replacement for the Husqvarna FE 450
Fe 450 Below are the instructions that will allow you to carry out the routine maintenance service by replacing the engine oil and oil filter on the Husqvar…
How to replace the engine oil and oil filter on the Husqvarna FE 450.
How to replace the engine oil and oil filter on the Husqvarna FE 450.
Fe 450 Today's procedure will show us how to perform the routine maintenance service by replacing the engine oil and oil filter on the Husqvarna FE 450 endu…
How to perform service on the Husqvarna FE 450
How to perform service on the Husqvarna FE 450
Fe 450 In this brief and simple guide, discover the instructions for performing routine maintenance on the Husqvarna FE 450 by replacing the engine oil, air…

How to Replace the Air Filter on a Honda SH 300i Scooter?

In this tutorial, you will see how to replace the air filter on a Honda SH 300i scooter, a very simple and quick operation. Before proceeding, ensure the engine is completely cold for safety. Start by unscrewing both the 6 screws around the perimeter of the airbox and the 3 bolts of the circular cover, then remove the cover and unscrew the additional screw that has just been freed. Next, separate the box, remove the old filter, and clean the housing of any dirt residue. Finally, follow the reverse procedure to install the replacement.

Watch the video!


by ScegliAuto

More videos