Do it yourself
| ||||
|
Model: Husqvarna Te 300i
In this short guide we will see what are the main steps to be able to disassemble and replace the suspension of the Husqvarna TE 300i enduro motorcycle. First we raise the bike on the lower part of the engine and start removing the driver's pedal; now we are going to unscrew the suspension bolt that we find at the bottom, connected to the rear fork, as shown in the video. At this point we install the new suspension, of the right type, and make the adjustment (often you need the appropriate ring nut to screw or unscrew the suspension to adjust the hardness).
Posted on 10 September 2022 by ScegliAuto
|
How do you replace the front brake disc and pads of the LML Star?In order to replace the front brake disc and pads of the LML Star you need to loosen the nut that fixes the front wheel to the base of its forks. Once the nut has been loosened, it will be possible to remove the wheel and consequently unscrew the screws that secure the brake caliper to the relative disc. In this way it will be possible to unscrew the screws that fix the disc and remove the old pads from inside its housing. In this way all the parts can be replaced with new spare parts; after replacement, all the parts previously removed must be mounted. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |