Do it yourself
Frequently asked questions about cars and motorcycles
Today's guide will illustrate the main steps to dismantle and replace the rear suspension of the Husqvarna TE 300i enduro bike. First, lift the bike with a stand and start by removing the suspension support pin located at the lower part (using a socket spanner); then disconnect the suspension at the top to remove it, as shown in the video. At this point, install the new rear suspension and adjust the preload by applying the reverse procedure!

Updated on 21 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Te 300i In this brief guide, you will see the main steps to disassemble and replace the suspension on the Husqvarna TE 300i enduro bike. First, lift the bike…
Te 300i Today, in this video tutorial, see how to dismantle and replace the suspension spring on the Husqvarna TE 300i enduro bike. First, remove the plastic…
Te 300i In today's video, you will learn how to dismantle and overhaul the rear brake pump on the Husqvarna TE 300 enduro bike in simple steps. First, remove…

How do you reset the Oil Check light on the Sym VF 185?

In order to reset the Oil Check light on the Sym VF 185, you need to turn on the instrument panel by turning the key in the ignition switch. Once the panel is on, you can press and hold the button located at the bottom right of the instrument panel for a few seconds. You will need to continue holding the button for a few seconds and then release it before pressing the next button. This will make the Oil Check light disappear from the instrument panel, and you can turn it off again by turning the key in the opposite direction.

Watch the video!


by ScegliAuto

More videos