|
Do it yourself
| |||
| ||||
|
Model: Husqvarna Fe 350
To remove the rear mudguard of the Husqvarna FE 350, loosen the bolts securing the seat to its housing so that it can be completely removed. After removing the seat, you will have access to the clips securing the mudguard, which can now be pulled out of its housing; this will allow you to insert the new replacement part, securing it properly with the respective clips. Once the new mudguard is in place, check that it does not cause any issues while riding.
Updated on 21 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Fe 350
Today we will discover the steps to perform routine maintenance by replacing the engine oil and oil filter on the Husqvarna FE 350 enduro bike. First…
Fe 350
To change the engine oil on the Husqvarna FE 350, you need to remove the plastic cover located at the bottom of the bike. Once this cover is removed,…
Fe 350
Today's guide will show you the steps to install the brake and clutch lever guards on the Husqvarna FE 350 enduro bike. First, obtain the appropriate…
|
How to reset the oil light on the Honda SH 125
If the oil light appears on your Honda SH 125 dashboard despite having recently changed the oil, don't worry as you can resolve this minor issue with a simple manual reset procedure. First, turn on the ignition and hold down the "Info A" and "Info B" buttons located at the bottom of the left knob. At this point, press the "Info B" button multiple times until the oil change indicator starts to flash. Finally, press the "Info A" button once to perform the reset. The procedure is now complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
