Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Number Plate Holder on a Husqvarna TE 350

Model: Husqvarna Fe 350
Part:

Video tutorial

To replace the number plate holder on a Husqvarna TE 350, completely remove the motorcycle seat from its housing to access the underlying components. Here, you will find the screws that secure the rear mudguard and the number plate holder.

By loosening these screws, you can detach the number plate holder from its housing, allowing you to insert the new replacement part. The new part must be secured with the appropriate screws, and then reinsert the motorcycle seat into its place.


Updated on 1 November 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light and Indicators on a Husqvarna FE 350
How to Replace the Rear Light and Indicators on a Husqvarna FE 350
Fe 350 In this brief guide, follow the steps to remove and replace the rear light and indicators on the Husqvarna FE 350 enduro bike. First, place the bike …
Replace the Coolant in the Husqvarna FE 350
Replace the Coolant in the Husqvarna FE 350
Fe 350 Today, we will see in this brief and simple guide how to bleed and replace the coolant in the Husqvarna FE 350, following the instructions below. Fir…
How to Replace the Rear Mudguard of the Husqvarna FE 350?
How to Replace the Rear Mudguard of the Husqvarna FE 350?
Fe 350 To remove the rear mudguard of the Husqvarna FE 350, loosen the bolts securing the seat to its housing so that it can be completely removed. After re…

How to Change the Engine Oil of a BMW R9T

To change the engine oil of a BMW R9T, follow these steps. Ensure the engine is warm but not too hot. Position the bike on a flat surface and lift the front using a motorcycle stand. Remove the oil cap from the engine oil reservoir. Place a catch container under the oil drain plug, usually located on the underside of the engine. Unscrew the oil drain plug and let the old oil drain completely into the container. Once drained, re-tighten the oil drain plug. Remove the oil filter using an oil filter wrench. Clean the mounting surface of the filter and apply a bit of new oil to the seal of the new filter. Install the new oil filter. At this point, fill the engine with new oil, and you will have completed the replacement.

Watch the video!


by ScegliAuto

More videos