|
Do it yourself
| |||
| ||||
|
Model: Husqvarna 701 Sm
Today's steps will show you how to install the additional fuel tank on the Husqvarna SM 701 enduro bike. First, place the bike on a stand and start by removing the rider's seat and the plastic covers on the sides, unscrewing all the fixing screws. Then, install the additional fuel tank and connect it using the kit, as illustrated in the video. At this point, reassemble the rider's seat and side chains, applying the reverse procedure of disassembly!
Updated on 1 September 2026 by ScegliAuto
This video is currently unavailable
Related tutorials
701 Sm
To replace the fuel filter on the Husqvarna 701, loosen the fuel pump plate located at the bottom of the rear mudguard. Once loosened, collect the fu…
701 Sm
To replace the fuel filter on the Husqvarna 701, unscrew the central bolt that secures the rear wheel, which can be removed after disconnecting the c…
701 Sm
To change the engine oil of the Husqvarna 701, you need to loosen the drain plug of the oil tank located at the bottom centre of the bike: by unscrew…
|
How to Replace the Tyres on the Husaberg FE 450
In this guide, follow the instructions to remove and replace the tyres on the Husaberg FE 450 enduro bike. First, place the bike on a stand and lift the wheel off the ground; then, undo the bolts securing the brake caliper to remove it, as shown in the video. Next, unscrew the central axle of the wheel, removing the tyre from the rim (deflating it and using levers); then install the new tyre, ensuring it has the correct dimensions, following the video tutorial to the end! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
