Do it yourself
Frequently asked questions about cars and motorcycles

Model: Husqvarna 701 Sm
Part:

To install the luggage rack on the Husqvarna 701, you need to loosen the screws that secure the seat to its housing, completely removing it: after the seat has been removed, you can also unscrew the screws that secure the fairings on its sides and at the rear of the bike. On the last removed fairing, you will need to drill four holes corresponding to the supports of the luggage rack. The luggage rack should then be secured with the appropriate screws, which will be inserted into the holes; after installation, you can remount the seat and the side fairings.

Updated on 19 June 2026 by ScegliAuto

Video tutorial

Related tutorials

701 Sm Today's steps will show you how to install the additional fuel tank on the Husqvarna SM 701 enduro bike. First, place the bike on a stand and start b…
701 Sm To replace the exhaust on a Husqvarna 701 SM, loosen the screws securing the left side panel at the rear of the bike, near the exhaust. By removing t…
701 Sm To replace the exhaust on the Husqvarna 701 SM, remove the seat to access the screws underneath that secure the side panels. This will allow you to l…

Where are the fuses located on the Piaggio Vespa GTS 125?

The fuses of the Piaggio Vespa GTS 125 are located inside the front fairing of the scooter: to access the fuse box, press the ignition switch fully. This will cause the panel located immediately below the ignition switch to open: the fuse box will be positioned inside this panel, in the upper left area. Inside the box, you will find the fuses that control the operation of the front headlamp, the horn, the ABS, etc. After removing the damaged old fuse, insert a new one with the same amperage.

Watch the video!


by ScegliAuto

More videos