Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Hyundai Coupe
    4. : Brake discs

Hyundai Coupe - Brake discs

Hyundai Coupe (2001-2009 / GK)
Replacing the front brake discs
Lift your car and unscrew the wheel bolts to be able to remove them, now unscrew the two bolts which are located exactly in the upper and lower part of the …read all…
Posted on 22 September 2023 by ScegliAuto
Hyundai Coupe (2001-2009 / GK)
Replacement discs and front pads
If the thickness of the brake discs has reduced and the surface has become very irregular, it is certainly advisable to replace them, obviously also changing …read all…
Posted on 15 September 2023 by ScegliAuto
Anti roll bar (1) Brake discs (2) Cabin air filter (1) Door panel (1) Interior rearview mirror (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos