Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb of the BMW 2 Series

Model: BMW Serie 2 F45 - Years 2014-2021
Part: Headlight bulb

Replacing the front headlight bulb of a BMW 2 Series is a simple and quick operation to be carried out independently. To perform this operation, we must open the front hood of the vehicle and remove the cover of the light fixture located at the headlight. We extract the bulb by pressing the sides and disconnect the connector from it. We connect the new bulb to the connector and insert it into the headlight. After replacing the position lights, we replace the fog lights. To perform this operation, we must remove the cover of the light fixture located at the windshield washer fluid tank. We remove and disconnect the connector from the bulb and insert the new one. After connecting the bulb to the connector, we close the cover.

Posted on 6 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Headlight Bulb on a BMW 2 Series?
How to Replace the Rear Headlight Bulb on a BMW 2 Series?
BMW Serie 2 (2014-2021 / F45) To replace the rear headlight bulb on a BMW 2 Series, open the trunk to access the top of the headlight. There will be a small cover that needs to be…
How to replace the front headlight bulb of the BMW 2 Series F22
How to replace the front headlight bulb of the BMW 2 Series F22
BMW Serie 2 (2013-2021 / F22) When one of the bulbs in the front headlight of your BMW 2 Series f22 stops working suddenly, it is not necessary to go to a local workshop to replac…
How to replace the rear lights of the BMW 2 Series
How to replace the rear lights of the BMW 2 Series
BMW Serie 2 (2014-2021 / F45) The instructions in this guide will show us how to disassemble and replace the bulbs of the rear headlight of the BMW 2 Series. First, we open the re…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos