Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on a BMW Series 2 F22

Model: BMW Serie 2 F22 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Headlight bulb

See other generations:
Video tutorial

When one of the headlight bulbs on your BMW Series 2 F22 suddenly stops working, you don't necessarily need to go to a local shop to replace it. In fact, with the procedure described below, you can complete the replacement on your own without additional costs.

First, lift the hood and locate the rubber cap corresponding to the headlight, then remove it. After that, disconnect the electrical connector and replace the faulty bulb with a new one. Finally, correctly reinstall the protective cap, and you're done.


Updated on 30 October 2026 by ScegliAuto


Related tutorials

How to Replace the Key Fob Battery for BMW 2 Series F22
How to Replace the Key Fob Battery for BMW 2 Series F22
BMW Serie 2 (2014-2021 / F45) This guide shows how to replace the key fob battery for the BMW 2 Series F22. First, extract the physical key from the fob by pressing the release bu…
How to Replace the Rear Headlight Bulb on a BMW 2 Series?
How to Replace the Rear Headlight Bulb on a BMW 2 Series?
BMW Serie 2 (2014-2021 / F45) To replace the rear headlight bulb on a BMW 2 Series, open the trunk to access the top of the headlight. There will be a small cover that needs to be…
How to Replace the Headlight Bulb on a 2015 BMW 2 Series
How to Replace the Headlight Bulb on a 2015 BMW 2 Series
BMW Serie 2 (2014-2021 / F45) To quickly and safely replace the headlight bulb on your 2015 BMW 2 Series 228i, follow the steps outlined in this mini guide. First, turn off the ca…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos