Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Coupe
    4. : Replacing the front brake discs

Hyundai Coupe - Video tutorial

Model: Hyundai Coupe GK - Years 2001-2009
Part: Brake discs
Operation: Replacing the front brake discs

Lift your car and unscrew the wheel bolts to be able to remove them, now unscrew the two bolts which are located exactly in the upper and lower part of the brake on its rear. In this way you can release the part of the brake where the piston is, now you have access to two other bolts which, by unscrewing them, will also allow you to remove the brake pads. Now you will have to remove the two screws recessed on the most central part of the brake disc, in this way you will be able to give the disc housing a good clean and you can replace it without problems.


Posted on 22 September 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos