Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Hyundai
  4. :
  5. Coupe
  6. : Car anti-roll bar replacement

Hyundai Coupe - Video tutorial

Model: Hyundai Coupe GK - Years 2001-2009
Part: Anti roll bar
Operation: Car anti-roll bar replacement

To carry out this work, we need to raise the car on appropriate ramps. After this first operation, we block the wheels using the appropriate wedges or alternatively we use bricks. The bars that are connected to the arms with rubber bushings are subject to breakage and wear. Almost certainly having to change the stabilizer bars we are forced to replace the bushings as well. Once we have carried out this operation, we must disassemble the bushings and the relative brackets with which they are fixed. We must therefore disconnect the bar from the fixing points of the body and suspension and, then, we must remove it.


Posted on 15 September 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos