Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Replacing Drop Links

Model: Hyundai Santa Fe MK 1 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Anti-roll bar

See other generations:
Video tutorial

Wear and/or failure of the spherical joints of the drop links (which are the connecting elements between the anti-roll bar and the shock absorber) results in noise while driving over uneven surfaces that resembles a distinct knocking; those used for replacement on the vehicle in question feature an improvement over the original ones: they are equipped with a grease nipple; keeping the spherical joint well lubricated certainly prevents wear; to perform the replacement, it is essentially a matter of unscrewing the locking nuts of the spherical joint pin while holding it during disassembly either with a ratchet or by inserting the hex key into the corresponding socket.


Updated on 16 February 2026 by ScegliAuto


Related tutorials

Guide to replacing the timing chain on a Hyundai Santa Fe
Guide to replacing the timing chain on a Hyundai Santa Fe
Hyundai Santa Fe (2012-2018 / MK 3) In this guide, we will outline the main instructions for replacing the timing chain on a Hyundai Santa Fe. To access the engine's timing system, you …
Instructions for Replacing Spark Plugs
Instructions for Replacing Spark Plugs
Hyundai Santa Fe (2000-2006 / MK 1) Remove the plastic engine cover: as this is a V6 engine, the three spark plugs on the front bank are easily accessible, but those on the rear bank ca…
Instructions for Replacing the Starter Motor
Instructions for Replacing the Starter Motor
Hyundai Santa Fe (2000-2006 / MK 1) If the starter motor does not engage when turning the ignition key, it is likely damaged; however, before rushing to replace it, ensure the battery i…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos