|
Do it yourself
| |||
| ||||
How to Replace the Stabiliser Link of an Opel Zafira B
Model: Vauxhall Zafira
Zafira B, A05, MK 2
- Years 2005-2011
Let's see how to replace the stabiliser link of the Opel Zafira B: start by loosening the nuts of the front wheel on the side you are working on, then lift the front of the car and place it on two sturdy axle stands. Remove the wheel. Spray some WD-40 on the link connections; let it sit for a few minutes and clean the threads with a wire brush. Hold the nut with a 19 mm spanner and unscrew it with a ratchet and a 19 mm socket. Remove the nut and washer. Repeat the same operation on the nut that secures the link to the shock absorber arm. Remove the old link. You can find the new one from TRW on auto-doc.it with EAN code 3322937298426 at a price of £11.49 each plus £9.95 for shipping. Check the condition of the bushes before fitting the new link; clean the mounting seats well with a wire brush and WD-40, then position the new link (it is symmetrical, so there is no specific mounting direction). Screw on the new nuts, hold the threaded pin, and tighten the nut to 55 Nm on both sides. Apply a thin layer of copper grease to the threads of the new nuts to prevent them from seizing. Lower the car, tighten the wheel, and check that everything is in order.
Posted on 24 April 2026 by ScegliAuto
Video tutorial
Related tutorials
Vauxhall Zafira
(1999-2005 /
Zafira A, MK 1, T98)
Let's see how to replace the front stabiliser bar on the Opel Zafira Version A: loosen the bolts of the front wheels and lift the vehicle. Place it o…
Vauxhall Zafira
(2005-2011 /
Zafira B, A05, MK 2)
Replace the damaged starter motor on an Opel Zafira. Start by disconnecting the battery terminals. Use pliers to disconnect the power terminals of th…
Vauxhall Zafira
(2005-2011 /
Zafira B, A05, MK 2)
In this video tutorial, you will learn how to dismantle and replace the rear bridge bushes on an Opel Zafira B, second series. First, lift the vehicl…
Other guides you may be interested in
|
How to Reset the Central Locking of the Volkswagen Golf 4?
If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.161
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |