Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Hyundai I20
    4. : Spark plugs

Hyundai I20 - Spark plugs

Hyundai I20 (2014-2021 / IB, GB, MK 2)
How do you replace the spark plugs on the Hyundai I20?
Replacing the spark plugs of the Hyundai I20 is done by opening the bonnet in order to access the engine compartment, thus loosening the bolts that fix the …read all…
Posted on 5 May 2023 by ScegliAuto
Hyundai I20 (2008-2014 / MK 1, PB)
How to replace the spark plugs Hyundai I20 1.4
Let's see how to remove the spark plugs of a gasoline Hyundai I20. We raise the hood, we locate the cylinder head of the car. We disassemble the cover from …read all…
Posted on 8 January 2024 by ScegliAuto
Airbags (2) Alternator (1) Car stereo (12) Battery (4) Spark plugs (2) Bodywork (1) Key (9) Timing belt (7) V-belt (1) -board computer (7) Checks and maintenance (29) Tail light (1) Air filter (2) Cabin air filter (6) Diesel filter (1) Hand brake (1) Accessory Kit (1) Light bulb (1) Headlight bulb (5) Rear light bulb (3) Interior lights ceiling light bulb (1) Handle (2) Door panel (4) Front bumper (1) Rear bumper (2) Brake pads (4) Tires (3) Gear Shift Knob (1) Window lift button (2) Instrument cluster (11) Fuse box (7) Outside rearview mirror (2) Windscreen wipers (1) Central tunnel (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos