Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. I20
    4. : How to replace the spark plugs Hyundai I20 1.4

Hyundai I20 - Video tutorial

Model: Hyundai I20 MK 1, PB - Years 2008-2014
Part: Spark plugs
Operation: How to replace the spark plugs Hyundai I20 1.4

Let's see how to remove the spark plugs of a gasoline Hyundai I20. We raise the hood, we locate the cylinder head of the car. We disassemble the cover from above the coils, remove with a screwdriver the screws on the sides of the coils on the motor head. Removed the coils, unscrew the spark plugs with a socket wrench, pull them out of the cylinder head. We take the new spark plugs and accompany them with the socket wrench extension in the engine head, tighten them and connect the power coils to each coil. We screw the clamping screws to the sides of the coils, then finally we mount the cover over the head.


Posted on 8 January 2024 by ScegliAuto



How do you replace the spark plugs on the Hyundai I20?
Hyundai I20 (2014-2021 / IB, MK 2, GB) Replacing the spark plugs of the Hyundai I20 is done by opening the bonnet in order to access the engine compartment, thus loosening the bolts that f
Hyundai I20 timing chain disassembly guide
Hyundai I20 (2008-2014 / MK 1, PB) Let's see in this guide the main instructions that will allow us to disassemble and replace the timing chain of the Hyundai I20. First of all, we ope
How to fit the front armrest for Hyundai I20
Hyundai I20 (2014-2021 / IB, MK 2, GB) A particularly useful accessory is the front armrest: you don't know how much you need until it's mounted, especially if it also has a large compartm

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos