Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Hyundai I20
    4. : Window lift button

Hyundai I20 - Window lift button

Hyundai I20 (2008-2014 / MK 1, PB)
How to replace the hyundai i20 power window switch
In this short and simple guide, let's see how to disassemble and replace the Hyundai I20 window regulator button, following the instructions below. First of …read all…
Posted on 9 April 2023 by ScegliAuto
Hyundai I20 (2014-2021 / IB, GB, MK 2)
Window regulator button repair on Hyundai I20
It often happens that on Hyundai cars one of the buttons to lower and raise the windows has broken. In fact, by pressing it, you will notice that the movement …read all…
Posted on 6 February 2024 by ScegliAuto
Airbags (2) Alternator (1) Car stereo (12) Battery (4) Spark plugs (2) Bodywork (1) Key (9) Timing belt (7) V-belt (1) -board computer (7) Checks and maintenance (29) Tail light (1) Air filter (2) Cabin air filter (6) Diesel filter (1) Hand brake (1) Accessory Kit (1) Light bulb (1) Headlight bulb (5) Rear light bulb (3) Interior lights ceiling light bulb (1) Handle (2) Door panel (4) Front bumper (1) Rear bumper (2) Brake pads (4) Tires (3) Gear Shift Knob (1) Window lift button (2) Instrument cluster (11) Fuse box (7) Outside rearview mirror (2) Windscreen wipers (1) Central tunnel (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos