Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Window Switch Panel on a Hyundai i20

Model: Hyundai I20 MK 1, PB - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Power window switch

See other generations:
Video tutorial

This brief and simple guide shows how to remove and replace the window switch panel on a Hyundai i20, following the instructions below. First, open the front door of your car and start by removing the door panel; to do this, unscrew the fixing screws found on it, disconnect the electrical connector of the switch panel and the handle cable.

Now remove the switch panel from the door panel and replace it with the new one; then reassemble everything by applying the reverse procedure!


Updated on 3 July 2026 by ScegliAuto


Related tutorials

How to Disable the Passenger Airbag in the Hyundai I20?
How to Disable the Passenger Airbag in the Hyundai I20?
Hyundai I20 (2014-2021 / IB, MK 2, GB) This tutorial shows how to disable the passenger airbag in the Hyundai I20, a very simple and quick operation that must be done after placing a rear-…
How to Reset the TPMS on a Hyundai i20
How to Reset the TPMS on a Hyundai i20
Hyundai I20 (2014-2021 / IB, MK 2, GB) To reset the low tyre pressure sensor, follow these steps: sit in the driver's seat and turn on the ignition. Locate the button on the steering wheel…
Where are the Fuses Located in the Hyundai i20?
Where are the Fuses Located in the Hyundai i20?
Hyundai I20 (2014-2021 / IB, MK 2, GB) Any fuse in the Hyundai i20 is located inside one of the dedicated fuse boxes present in the vehicle: this model has two. The first is found in the l…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos