Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. I20
    4. : Removal of the external door handle Hyundai I20

Hyundai I20 - Video tutorial

Model: Hyundai I20 MK 1, PB - Years 2008-2014
Part: Handle
Operation: Removal of the external door handle Hyundai I20

In this video tutorial we will see how to remove the external door handle of a Hyundai I20 in very simple steps. First we open the door and with a flat screwdriver remove the plastic cap that we find on the side: then with a 10 mm wrench we go to unscrew the screw that we find inside. At this point we are going to remove the rectangular piece that we find next to the handle with a plastic lever; it will be enough to pry to remove the missing piece, as shown in the video. Then apply the reverse procedure for reassembly!


Posted on 14 January 2024 by ScegliAuto



How to replace the outside door handle in Hyundai I20?
Hyundai I20 (2008-2014 / MK 1, PB) As we can see in this tutorial, disassembling the outside door handle on a Hyundai I20 is an extremely simple and fast operation. First of all we ope
How to replace the external rearview mirror on the Hyundai I20?
Hyundai I20 (2014-2021 / IB, MK 2, GB) Replacing the external rearview mirror in the Hyundai I20 is an extremely simple and fast operation, let's see how to proceed in this tutorial. First
How to open and close the external rearview mirrors of the Hyundai I20
Hyundai I20 (2014-2021 / IB, MK 2, GB) Today we will see the instructions that will allow us to open and close the external rearview mirrors of the Hyundai I20. First of all, we get into t

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos