Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove the Door Panel on Hyundai i20

Model: Hyundai I20 MK 1, PB - Years 2008-2014
Part: Door trim panel

Learn how to remove the rear door panel from the Hyundai i20. Remove the plastic screw cover in the area of the door opening lever, then unscrew the screw inside. Remove the window winding handle. Unscrew the screws in the internal handle of the panel. Unclip the door panel. Pull the panel away from the door (disconnect the wiring harness and the opening cable). Perform the desired maintenance inside the door or replace the panel with identical parts. Test the operation of the winding handle after reassembly.

Updated on 30 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Door Panel on Hyundai i20
Removing Door Panel on Hyundai i20
Hyundai I20 (2014-2021 / GB, IB, MK 2) Remove the door panel if you need to work inside or if it is broken. Let's see how to remove it on a Hyundai i20. Remove the plastic under the window…
How to Replace the Window Switch Panel on a Hyundai i20
How to Replace the Window Switch Panel on a Hyundai i20
Hyundai I20 (2008-2014 / MK 1, PB) This brief and simple guide shows how to remove and replace the window switch panel on a Hyundai i20, following the instructions below. First, open t…
How to Replace the External Wing Mirror on the Hyundai I20
Hyundai I20 (2020-2026 / BC3, MK 3) Today, follow these instructions to remove and replace the external wing mirror on the Hyundai I20. First, open the front door of the vehicle and sta…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos