Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. I20
    4. : Remove door panel of a Hyundai I20

Hyundai I20 - Video tutorial

Model: Hyundai I20 IB, MK 2, GB - Years 2014-2021
Part: Door panel
Operation: Remove door panel of a Hyundai I20

We remove the door panel if we have to work inside or if it is broken. Let's see the disassembly on a Hyundai I20. We remove the plastic under the window (rear mirror). With a screwdriver we unscrew the screws placed in the handle and in the space of the opening lever (we unscrew all the screws). Remove the panel and unhook it from the door (disconnect the power cables and the opening cable). We replace the worn panel with a new one that is the same. Mount it on top of the door and screw in the screws, mount the plastic cover on the corner of the window.


Posted on 10 December 2023 by ScegliAuto



How to replace the hyundai i20 power window switch
Hyundai I20 (2008-2014 / MK 1, PB) In this short and simple guide, let's see how to disassemble and replace the Hyundai I20 window regulator button, following the instructions below. F
Remove the door panel on Hyundai I20
Hyundai I20 (2008-2014 / MK 1, PB) Let's see how to remove the rear door panel of the Hyundai I20. We remove the plastic screw cover cap in the space of the door opening lever, we unsc
Remove the door panel on a Hyundai i20
Hyundai I20 (2014-2021 / IB, MK 2, GB) Let's find out in this video tutorial how to remove the door panel on a Hyundai i20, model produced from 2014 to 2021. First we have to remove the sc

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos