Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Auxiliary Belt on a Hyundai i20

Model: Hyundai I20 MK 1, PB - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Timing belt

See other generations:
Video tutorial

Let's look at removing the auxiliary belt on a Hyundai i20. Remove the alternator belt. Lift the bonnet, remove the engine soundproofing panel and the belt cover.

Using a suitable spanner, loosen the tensioner pulley and slide the belt off the alternator and pulley. Fit the new belt in the engine bay: use a spanner to tension the tensioner pulley until the belt has the correct tension (as previously fitted).

Check the tensioner and the belt itself. Close the front bonnet after replacement.


Updated on 19 March 2026 by ScegliAuto


Related tutorials

Removing the Timing Belt on Hyundai I20
Removing the Timing Belt on Hyundai I20
Hyundai I20 (2008-2014 / MK 1, PB) In this video tutorial, you will see the main instructions for removing the timing belt on a Hyundai I20. First, lift the bonnet of your car; then re…
How to Replace the Auxiliary Belt on a Hyundai i20
How to Replace the Auxiliary Belt on a Hyundai i20
Hyundai I20 (2008-2014 / MK 1, PB) Start by opening the front bonnet of your Hyundai i20 to access the engine cover. Proceed to remove the engine cover by unscrewing the screws that se…
How to Reset the Service Light on a Hyundai I20
How to Reset the Service Light on a Hyundai I20
Hyundai I20 (2014-2021 / IB, MK 2, GB) This tutorial shows the procedure to reset the service light on a 2019 Hyundai I20. The procedure is simple and takes little time to complete. To res…

    Frequently Asked Questions

    • Hyundai I20 2014-2021 - After how many km do you change the timing chain in the Hyundai i20? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos