Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Ix20
    4. : Headlight bulb

Hyundai ix20 - Headlight bulb

Hyundai ix20 (2010-2019 / OJ)
How to replace the headlight bulb on Hyundai IX20
If the headlight bulb of your Hyundai Ix20 (year 2010-2019) has suddenly stopped working and you want to find out how to replace it without having to go to a …read all…
Posted on 2 June 2023 by ScegliAuto
Hyundai ix20 (2010-2019 / OJ)
Replace the headlight bulb of the Hyundai Ix 20
Today we will see, in this video tutorial, how to remove and replace the headlight bulb of the Hyundai Ix 20, in simple steps. First we open the bonnet of our …read all…
Posted on 24 May 2022 by ScegliAuto
Hyundai ix20 (2010-2019 / OJ)
How to replace light bulb on Hyundai Ix20
KO headlight bulbs? Let's see the disassembly of the bulbs placed in the headlights. We lift the front hood and put it in safety, then we remove the plastic …read all…
Posted on 5 February 2024 by ScegliAuto
Hyundai ix20 (2010-2019 / OJ)
How to replace the Hyundai ix20 low beam headlight bulb
If you have landed on this page you most likely need some advice on replacing the front light of your ix20. You are in the right place, we will do it together. …read all…
Posted on 26 November 2023 by ScegliAuto
Hyundai ix20 (2010-2019 / OJ)
How to replace the headlight bulb on Hyundai Ix20
To carry out this operation, it is advisable to unhook the hood from the special lever to then be able to lift and fix it with the appropriate rod, disconnect …read all…
Posted on 8 October 2023 by ScegliAuto
Airbags (1) Battery (3) Key (3) Checks and maintenance (5) Headlight (1) Air filter (1) Cabin air filter (3) Diesel filter (1) Accessory Kit (1) Light bulb (1) Headlight bulb (5) Rear light bulb (2) Door panel (1) Brake pads (2) Tires (1) Door (1) Instrument cluster (1) Fuse box (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos