Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. ix20
    4. : How to replace the Hyundai ix20 low beam headlight bulb

Hyundai ix20 - Video tutorial

Model: Hyundai ix20 OJ - Years 2010-2019
Part: Headlight bulb
Operation: How to replace the Hyundai ix20 low beam headlight bulb

If you have landed on this page you most likely need some advice on replacing the front light of your ix20. You are in the right place, we will do it together. Engage the handbrake and open the hood. Unscrew the headlight cover to access the bulbs. Disconnect the connector for the burned-out dipped beam headlight. Unhook its catch and replace the piece with the new spare. Then reposition the latch correctly in its place and insert the electrical connector. Replace the airtight lid and screw it on. Check that everything is working properly.


Posted on 26 November 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos