Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Courtesy Lights on the Hyundai IX20?

Model: Hyundai ix20 OJ - Years 2010-2019
Part: Light bulb

To replace the bulbs of the interior lights, use a tool to pry between the light unit and its housing. This will allow you to detach the light unit and access the bulb. Remove the old bulb from its housing and replace it with a new spare part. Once the new bulb is inserted, repeat the same process for the other courtesy light. When both bulbs have been replaced, reinsert the light units and check the correct functioning of the devices.

Updated on 29 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb of the Hyundai IX20
How to replace the front headlight bulb of the Hyundai IX20
Hyundai ix20 (2010-2019 / OJ) Replacing the right front headlight bulb on a 2013 Hyundai IX20 vehicle is a simple and quick operation to be carried out independently. To replace t…
How to change daytime running lights and fog lights on Hyundai IX20
How to change daytime running lights and fog lights on Hyundai IX20
Hyundai ix20 (2010-2019 / OJ) If you simply need to replace a bulb in the daytime running lights or fog lights of the Hyundai IX20, there is no need to dismantle half the car or e…
How to replace the air filter of the Hyundai IX20
How to replace the air filter of the Hyundai IX20
Hyundai ix20 (2010-2019 / OJ) The replacement of the air filter of the Hyundai IX20 follows easily executable steps. The filter we will insert is a JFAK22A2320. The first step is …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos