Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. ix20
    4. : How to change rear brake light bulb on Hyundai IX20

Hyundai ix20 - Video tutorial

Model: Hyundai ix20 OJ - Years 2010-2019
Part: Rear light bulb
Operation: How to change rear brake light bulb on Hyundai IX20

If the rear brake light bulb of your Hyundai Ix20 doesn't work correctly or is completely faulty, don't worry because to replace it, just follow the steps described in the following guide dedicated to you. Before you begin, make sure your car is completely turned off and parked safely on a level surface. Soon after, go outside and lift the trunk. Then remove the headlight's plastic side protection and undo all the screws that hold the headlight in place. At this point, gently pull the latter towards you and proceed with replacing the bulb.


Posted on 19 December 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos