Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Ix35
    4. : Onboard computer

Hyundai ix35 - Onboard computer

Onboard Computer Hyundai ix35 (2009-2015 / mk 1)

Hyundai ix35 (2009-2015 / MK 1)
How to Activate and Deactivate Traction Control on a Hyundai IX35
To activate and deactivate traction control on a Hyundai IX35, locate the control on the left side of the steering wheel (control panel to the left of the …Read all…
Posted on 5 August 2026 by ScegliAuto
Hyundai ix35 (2009-2015 / MK 1)
Replacing the On-Board Computer on a Hyundai Ix35
Using a plastic wedge, remove the plastic "cap" above the on-board computer by prying in the gaps. Similarly, extract the controls located beneath the computer …Read all…
Posted on 7 May 2026 by ScegliAuto
Airbag (4) Car stereo (12) Battery (1) Transmission (2) Spark plugs (1) Key (11) Timing belt (3) Onboard computer (2) Checks and maintenance (7) Throttle body (1) Headlight (2) Fog lights (1) Air filter (2) Cabin air filter (10) Fuel filter (1) Diesel fuel filter (3) Oil filter (2) Parking brake (7) Clutch (1) Grille (1) Window switch (1) Side marker bulb (1) Headlight bulb (5) License plate light (1) Handle (1) Transmission fluid (1) Engine oil (5) Clock (10) Windshield (1) Brake pads (2) Shift knob (1) Fuel pump (2) Car door (1) Instrument cluster (3) Fuse box (8) Seat (1) Parking sensors (1) Side mirror (2) Warning light – error code (4) (11) Tire pressure warning light (5) Service warning light (15) Steering wheel (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos