Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the On-Board Computer on a Hyundai Ix35

Model: Hyundai ix35 MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Onboard computer

Video tutorial

Using a plastic wedge, remove the plastic "cap" above the on-board computer by prying in the gaps. Similarly, extract the controls located beneath the computer (where the hazard light button is): if you cannot get in with the wedge, use a small flat screwdriver; there is no need to disconnect the connector as you do not need to completely remove the control panel, just pull it out to create space.

At this point, unscrew the screws that secure the display (two above and two below) and remove it from its housing. Disconnect the connector and other electrical cables, including the antenna cable, and you're done.

Proceed in reverse for reassembly.


Updated on 4 April 2026 by ScegliAuto


Related tutorials

Replacing the External Wing Mirror on a Hyundai Ix35
Hyundai ix35 (2009-2015 / MK 1) To remove and subsequently replace the external wing mirror on a Hyundai Ix35, simply leverage it from behind with your hands, pulling it out of its …
Where to find the tyre pressure values on the Hyundai IX35?
Where to find the tyre pressure values on the Hyundai IX35?
Hyundai ix35 (2009-2015 / MK 1) When the TPMS light illuminates on a Hyundai IX35, it means you need to adjust the tyre pressure. To adjust the pressure, you will need a pressure ga…
How to Reset the "Service" Light on a Hyundai IX35?
How to Reset the "Service" Light on a Hyundai IX35?
Hyundai ix35 (2009-2015 / MK 1) Before you start, sit in the driver's seat of your Hyundai IX35. Begin by activating the instrument panel by pressing the ignition button. Next, repe…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos