Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the TPMS light on the Hyundai Kona

Model: Hyundai Kona MK 1 - Years 2017-2023
Part: Warning light – error code

The reset of the tire pressure warning light on a Hyundai Kona vehicle is done semi-automatically, but always after adjusting the tire pressure following the manufacturer's instructions. The steps to reset the warning light are as follows: -first step: open the glove compartment on the passenger side; -second step: press and hold the TPMS button; -third step: turn on the instrument panel; -fourth step: wait for the light to stop flashing, usually takes about 10 seconds; -fifth step: release the button; After completing the steps, turn off the instrument panel and restart it to complete the reset.

Posted on 21 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the TPMS Light on a Hyundai Kona
How to Reset the TPMS Light on a Hyundai Kona
Hyundai Kona (2023-2026 / MK 2) These brief and simple steps will illustrate the procedure to reset the tyre pressure monitoring system (TPMS) light on the Hyundai Kona. Before reca…
How to Reset the TPMS Light on the Hyundai Kona
How to Reset the TPMS Light on the Hyundai Kona
Hyundai Kona (2017-2023 / MK 1) The TPMS light, related to the tyre pressure of the Hyundai Kona, lights up when it is necessary to check one or more tyres. You will need to check t…
How to perform the verification and reset of the TPMS of the Hyundai Kona
How to perform the verification and reset of the TPMS of the Hyundai Kona
Hyundai Kona (2017-2023 / MK 1) These short and simple steps will show us how to check the tire pressure and reset the TPMS warning on the Hyundai Kona. First, we get into the car a…

    Frequently Asked Questions

    • Hyundai Kona 2017-2023 - What does the urea warning light inside the instrument cluster of a Hyundai Kona mean? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos