Do it yourself
Frequently asked questions about cars and motorcycles

Where is the Crankshaft Position Sensor on the Hyundai Tucson MK3?

Model: Hyundai Tucson MK 3, TL - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Crankshaft position sensor

See other generations:
Video tutorial

In this video, we will locate the crankshaft position sensor on the Hyundai Tucson MK3. You can find the replacement part, for example, on allautoricambi. It has the code 833C0062, priced at £23.96 plus £9.95 for shipping.

To access it, you will need to remove the entire engine protection panel from underneath. It is located right in front of the engine block, in front of the cooling fan. You will see the electrical connector that needs to be disconnected, and then remove the entire component, including the retaining bracket, which you will replace with the new one. This will give you the opportunity to check its equivalence.

Once removed, you will understand how to reinstall it: although the working position is a bit awkward, it is not a difficult job.


Updated on 8 November 2026 by ScegliAuto


Related tutorials

Hyundai Tucson (2015-2021 / MK 3, TL) Here’s how to clean the MAP sensor on the Hyundai Tucson. Remove the engine cover, then disconnect the electrical connector for safety. Using a 10mm …
Hyundai Tucson (2015-2021 / MK 3, TL) If you need to intervene on the fuses of your third edition Hyundai Tucson, but you don't know where they are located, then all you have to do is rea…
Hyundai Tucson (2022-2026 / NX4, MK 4) If you own the brand new Hyundai Tucson and do not know where the fuse box containing all the vehicle's fuses is located, do not worry. Simply follow…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

What does the "Code 82" message indicate in the Chevrolet Orlando and how to remove it?

If the "Code 82" message appears on the dashboard of your Chevrolet Orlando, it means that the service interval in miles or time has been reached. Once all scheduled maintenance tasks are completed, you can remove the warning by following the simple procedure shown in this tutorial. First, insert the key and turn on the ignition, then press the "MENU" button located on the left control stalk and navigate to the screen displaying the "Reset" option. At this point, press the "SET/CLR" button at the end of the same stalk and confirm the reset.

Watch the video!


by ScegliAuto

More videos