Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Elantra
    4. : How to remove the headlight on Hyundai Elantra

Hyundai Elantra - Video tutorial

Model: Hyundai Elantra MK 6 - Years 2015-2020
Part: Headlight
Operation: How to remove the headlight on Hyundai Elantra

Do you want to remove the headlight of a Hyundai Elantra? Let's see how to proceed with the disassembly in the video: open the engine hood by pulling the hood opening lever and put it in safety with the rod. Unscrew the locking pins on the front bumper with a socket wrench or insert screwdriver. We remove the headlight from the car body, disconnect the power supply terminals. We assemble the new lighthouse with the attached new bulbs (if damaged, always suitable type and size) we insert the lighthouse in its housing. We screw the headlight with the respective locking pins, we test the functioning of the lights.


Posted on 15 October 2023 by ScegliAuto



How do you remove the front headlight of the Hyundai Elantra?
Hyundai Elantra (2010-2015 / UD, MK 5, MD) In order to remove the front headlight of the Hyundai Elantra, you need to open the hood so that you can access the screws that secure the headlight
How to replace the rear headlight bulbs in the Hyundai Elantra?
Hyundai Elantra (2010-2015 / UD, MK 5, MD) In this tutorial we can see how to replace the rear headlight bulbs in the Hyundai Elantra, an extremely simple and quick operation. First of all, ma
How to replace the headlights on a Hyundai Elantra?
Hyundai Elantra (2010-2015 / UD, MK 5, MD) As we can see in this tutorial, replacing the front headlights on a Hyundai Elantra is an extremely simple and quick operation. First of all, make su

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos