Do it yourself
| ||||
|
Hyundai Elantra - Video tutorial
Model: Hyundai Elantra
UD, MK 5, MD
- Years 2010-2015 If you are looking for a guide that allows you to quickly and completely independently replace the rear light bulb of your Hyundai Elantra then all you have to do is read the following information. Before starting with the various steps, we remind you that this is an operation to be carried out preferably with the engine off and with the battery disconnected. First, go to the back of the car and fully raise the hood. Remove the containment net and open the flap located in correspondence with the headlight affected by the replacement. Unscrew all the screws underneath and disconnect the connector. At this point, move outside and completely remove the lighthouse. Finally, all that remains is to replace the old bulb with the new one and reassemble the headlight correctly.
Posted on 15 April 2024 by ScegliAuto
How to replace the front headlight bulb of the 2017 Hyundai Elantra.
Hyundai Elantra (2015-2020 / MK 6) In the following guide dedicated to all owners of a 2017 Hyundai Elantra, we will discover how to correctly replace the front headlight bulb. First o
How do you replace the front headlight bulb of the Hyundai Elantra?
Hyundai Elantra (2015-2020 / MK 6) In order to replace the front headlight bulb of the Hyundai Elantra, you need to open the hood so that you can loosen the screws that secure the bump
How do you replace the rear headlight bulb of the Hyundai Elantra?
Hyundai Elantra (2000-2006 / MK 3, XD) In order to replace the rear headlight bulb of the Hyundai Elantra, you need to open the rear hatch to access the trunk compartment. Here, you can de Other guides that may interest you
|
How to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.106
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |