Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Elantra
    4. : Rear light bulb

Hyundai Elantra - Rear light bulb

Hyundai Elantra (2000-2006 / MK 3, XD)
How do you replace the rear headlight bulb of the Hyundai Elantra?
In order to replace the rear headlight bulb of the Hyundai Elantra, you need to open the rear hatch to access the trunk compartment. Here, you can detach the …read all…
Posted on 16 December 2023 by ScegliAuto
Hyundai Elantra (2010-2015 / UD, MD, MK 5)
How to replace the rear light bulbs on Hyundai Elantra
In today's video we will see how to replace the rear light bulbs of the Hyundai Elantra, in simple and quick steps. First of all we open the tailgate of the …read all…
Posted on 30 April 2024 by ScegliAuto
Hyundai Elantra (2010-2015 / UD, MD, MK 5)
How to replace the headlight bulb on Hyundai Elantra
If you are looking for a guide that allows you to quickly and completely independently replace the rear light bulb of your Hyundai Elantra then all you have to …read all…
Posted on 15 April 2024 by ScegliAuto
Hyundai Elantra (2000-2006 / MK 3, XD)
How to change the rear brake light Hyundai Elantra
Unfortunately, to check if the brake light bulbs are burned out, you need a helper to press the brake pedal. Apart from this detail, the work to be done for …read all…
Posted on 26 November 2023 by ScegliAuto
Alternator (1) Loudspeaker (1) Shock absorbers (4) Car stereo (7) Battery (7) Coil (3) Bushings (1) Arm (6) Gearbox (1) Spark plugs (4) Glove box (1) Key (6) Timing belt (9) -board computer (4) Checks and maintenance (14) Oil pan (1) Dashboard (1) Bearing (1) Brake discs (3) Headlight (4) Tail light (3) Fog lights (1) Air filter (8) Cabin air filter (7) Petrol filter (1) Oil filter (1) Clutch (1) Accessory Kit (4) Light bulb (1) Side turn signal light bulb (1) Headlight bulb (5) Rear light bulb (4) Interior lights ceiling light bulb (1) License plate light (1) Third brake light (4) Handle (9) Engine (6) Window motor (1) Starter motor (2) Gear oil (1) Door panel (1) Front bumper (2) Brake pads (3) Tires (1) Pump (2) Fuel pump (3) Door (1) Instrument cluster (3) Radiator (1) Passenger compartment heating radiator (1) Fuse box (6) Seat (1) Drive shaft (1) Lambda sensor (2) Suspensions (1) Outside rearview mirror (4) Drums and shoes (1) Engine head (2) Valve (1) Interior blower (1) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos