Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Elantra
    4. : Transmission

Hyundai Elantra - Transmission

Transmission Hyundai Elantra (1995-2000 / j 2, mk 2)

Hyundai Elantra (1995-2000 / J2, MK 2)
Instructions for Checking Gearbox Oil Level
The gearbox typically has two plugs: a lower one for draining the oil and one located on the side of the gearbox for filling with clean oil. The oil level is …Read all…
Posted on 25 February 2026 by ScegliAuto
Airbag (1) Alternator (1) Speaker (1) Shocks (4) Car stereo (4) Battery (7) Ignition coil (3) Bushings (1) Control arm (6) Transmission (1) Spark plugs (4) Body (1) Glove compartment (1) Key (10) Timing belt (9) V-belt (1) Onboard computer (2) Checks and maintenance (7) Oil pan (1) Dashboard (2) Bearing (1) Brake rotors (3) Headlight (8) Tail light (4) Fog lights (1) Air filter (9) Cabin air filter (10) Fuel filter (1) Oil filter (1) Parking brake (2) Clutch (1) Accessory kit (4) Light bulb (1) Side marker bulb (1) Headlight bulb (9) Tail light bulb (7) Interior dome light bulb (1) License plate light (1) (5) Handle (10) Engine (6) Power window motor (1) Starter motor (3) Transmission fluid (1) Engine oil (1) Clock (3) Door trim panel (4) Front bumper (3) Brake pads (3) Tires (1) Shift knob (2) Pump (2) Fuel pump (3) Car door (1) Instrument cluster (1) Radiator (1) Heater core (1) Fuse box (23) Seat (3) Axle shaft (1) Oxygen sensor (2) Suspension system (1) Side mirror (4) Warning light – error code (8) Tire pressure warning light (14) Service warning light (33) Brake drums and shoes (1) Fuel cap (1) Windshield wipers (1) Cylinder head (2) Valve (1) Blower motor (1) Steering wheel (2)

How to Program a New Key for a Mini Cooper

Programming a new key for a Mini Cooper model R56 is a very simple operation. The first thing to do is to get into the vehicle and sit in the driver's seat. Next, insert the new key into the ignition slot and start the car; after a few seconds, turn off the car and remove the key from the ignition. Wait a few seconds and repeat this process three more times before hitting the road. By doing this, your new key will be perfectly programmed for starting and stopping the vehicle.

Watch the video!


by ScegliAuto

More videos