Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Elantra
    4. : Third brake light

Hyundai Elantra - Third brake light

Hyundai Elantra (2015-2020 / MK 6)
How to replace the third brake light bulb in the Hyundai Elantra?
In this tutorial, we can see how to replace the third brake light bulb in the Hyundai Elantra, an extremely simple and quick operation. First of all, make sure …read all…
Posted on 21 November 2023 by ScegliAuto
Hyundai Elantra (2015-2020 / MK 6)
How to replace the third brake light in the Hyundai Elantra.
In today's video, we will see how to replace the third brake light in the Hyundai Elantra. First, we open the rear hood. We remove the hood's lining cover. …read all…
Posted on 9 August 2023 by ScegliAuto
Hyundai Elantra (2015-2020 / MK 6)
Third brake light replacement on Hyundai Elantra
Hi everyone! Replacing the single central brake light bulb on Hyundai Elantra is really very simple and very fast. To do this, in fact, it is sufficient that …read all…
Posted on 22 January 2024 by ScegliAuto
Hyundai Elantra (2015-2020 / MK 6)
Third brake light bulb replacement on Hyundai Elantra
Open the trunk by lifting the tailgate, and notice a hatch in the center of it (on the inside, of course). Remove this door and you will already find the light …read all…
Posted on 18 January 2024 by ScegliAuto
Alternator (1) Loudspeaker (1) Shock absorbers (4) Car stereo (7) Battery (7) Coil (3) Bushings (1) Arm (6) Gearbox (1) Spark plugs (4) Glove box (1) Key (6) Timing belt (9) -board computer (4) Checks and maintenance (14) Oil pan (1) Dashboard (1) Bearing (1) Brake discs (3) Headlight (4) Tail light (3) Fog lights (1) Air filter (8) Cabin air filter (7) Petrol filter (1) Oil filter (1) Clutch (1) Accessory Kit (4) Light bulb (1) Side turn signal light bulb (1) Headlight bulb (5) Rear light bulb (4) Interior lights ceiling light bulb (1) License plate light (1) Third brake light (4) Handle (9) Engine (6) Window motor (1) Starter motor (2) Gear oil (1) Door panel (1) Front bumper (2) Brake pads (3) Tires (1) Pump (2) Fuel pump (3) Door (1) Instrument cluster (3) Radiator (1) Passenger compartment heating radiator (1) Fuse box (6) Seat (1) Drive shaft (1) Lambda sensor (2) Suspensions (1) Outside rearview mirror (4) Drums and shoes (1) Engine head (2) Valve (1) Interior blower (1) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos