Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Third Brake Light in the Hyundai Elantra

Model: Hyundai Elantra MK 6 - Years: 2015, 2016, 2017, 2018, 2019, 2020
Part:

Video tutorial

In today's video, see how to replace the third brake light in the Hyundai Elantra. First, open the boot.

Remove the cover from the boot lining. Then, disconnect the power connector and remove the old bulb.

Next, insert a new unit of the same type and test its proper functioning. If all is well, proceed to reassemble the components, then finish the job. As you have seen, it was a simple and quick task, easily done independently in the garage.


Updated on 11 August 2026 by ScegliAuto


Related tutorials

Replacing Third Brake Light Bulb on Hyundai Elantra
Replacing Third Brake Light Bulb on Hyundai Elantra
Hyundai Elantra (2015-2020 / MK 6) Open the boot by lifting the tailgate, and notice a cover in the centre of it (on the inside, of course). Remove this cover and you will find the bul…
How to Change the Brake Light on a Hyundai Elantra
How to Change the Brake Light on a Hyundai Elantra
Hyundai Elantra (2015-2020 / MK 6) In today's video, you will see how to change the rear brake light on a Hyundai Elantra, model produced in 2019/2020. Start the operation by opening t…
Replacing the Third Brake Light on Hyundai Elantra
Replacing the Third Brake Light on Hyundai Elantra
Hyundai Elantra (2015-2020 / MK 6) Hello everyone! Replacing the bulb for the third brake light on a Hyundai Elantra is really simple and very quick. To do this, simply open the boot a…

How to Change the Time on the Peugeot 208

Today's guide will show you how to set the clock on the Peugeot 208's onboard computer, following the instructions below. First, get in the car and turn on the instrument panel; then press and hold the settings button on the panel for a few seconds until the time starts to flash, as shown in the video. At this point, press the left button to correctly set the time, adjusting the hour first and then the minutes; exit the onboard computer menu to save all the changes made!

Watch the video!


by ScegliAuto

More videos