Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Third Brake Light on Hyundai Elantra

Model: Hyundai Elantra MK 6 - Years 2015-2020
Part:

Hello everyone! Replacing the bulb for the third brake light on a Hyundai Elantra is really simple and very quick. To do this, simply open the boot and observe the area behind the third brake light: you will notice a cover that you need to remove. Once done, you can simply pull and extract the bulb holder without disconnecting it. Once in a comfortable position, unscrew the old bulb and screw in the new one you have purchased. Nothing could be easier! Reassemble everything and check that it works correctly. Good luck.

Updated on 9 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Third Brake Light Bulb on the Hyundai Elantra?
How to Replace the Third Brake Light Bulb on the Hyundai Elantra?
Hyundai Elantra (2015-2020 / MK 6) In this tutorial, you will see how to replace the third brake light bulb on the Hyundai Elantra, an extremely simple and quick operation. First, ensu…
Replacing Third Brake Light Bulb on Hyundai Elantra
Replacing Third Brake Light Bulb on Hyundai Elantra
Hyundai Elantra (2015-2020 / MK 6) Open the boot by lifting the tailgate, and notice a cover in the centre of it (on the inside, of course). Remove this cover and you will find the bul…
How to reset the service light on the 2018 Hyundai Elantra
How to reset the service light on the 2018 Hyundai Elantra
Hyundai Elantra (2015-2020 / MK 6) Today we will explain the steps to reset the service light of the 2018 Hyundai Elantra. The first step is to turn on the vehicle's instrument panel a…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos